Laser Safety Products

  • Glaser Jailer

    Active Laser Safety Window

    The Glaser Jailer by Lasermet is a fail-safe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window. It is suitable for all laser powers, wavelengths, and waveforms. The Glaser Jailer system isolates the laser safety input within 50ms of an inadvertent laser window strike, rendering the laser safe.

    • Interlock® safety
    • Suitable for Class 1 Laser Enclosures
    • Certified to BS EN IEC 60825-4
    Read moreDone

  • High Power Beam Dump

    LS-200-BD-HP

    Lasermet’s high power beam dump is designed for the LS-200 laser beam shutter. It is capable of dissipating higher power laser energy.

    Read moreDone
  • I-Extract Fume Extraction Systems by Lasermet

    I-Extract

    Fume Extraction Systems for Laser Welding

    I-Extract is Lasermet’s fume extraction system specifically designed for the extraction and filtration of gases and emissions created by lasers during laser welding, laser cutting, and laser cladding processes.

    Designed as an integrated part of Lasermet’s Laser Castle laser safety cabin, the I-Extract has ample power to extract the appropriate volume of emitted gases produced in the cabin.

    Read moreDone

  • ICS Buddy Portable Interlock System

    The Interlock® Monitor and Control Tablet you can take anywhere

    The ICS Buddy is Lasermet’s portable Interlock Monitor and Controller that can be used to remotely view and control the status of laser interlock controllers and laser shutters in a lab. 

    • Provides portable control
    • Remotely view and control laser shutters 
    • See the status of the whole lab remotely in Lab View
    • Ideal for multiple interlocks, shutters and LED warning signs
    Read moreDone

  • ICS-6 ELISe Interlock® Controller

    The ICS-6 Laser Safety Interlock ® Controller features full start-to-end dual channel architecture and fault detection capabilities to meet all safety requirements for lasers. The ICS-6 can be integrated with the complete range of Lasermet’s Interlock equipment to create a full laser safety system.

    • 3 expansion card sockets 
    • Interlocked mains supply and low voltage supply for beam shutters 
    • Laser Interlock® connector operators for all lasers
    • Time limited fail-safe override option
    Read moreDone

  • ICS-7-OEM Interlock Controller

    An OEM version of ICS Interlock®

    Lasermet’s established and proven ICS Interlock® control system is available as an OEM version which is specifically designed for integrators to use as part of the laser control system.

    • Dual-channel safety
    • Ready to use with PLC controllers
    • Fail-safe reliability
    • Compatible with expansion modules
    Read moreDone

  • ICS-9 Interlock® Controller

    NRTL Certified Laser Interlock® Control System

    The ICS-9 Laser Interlock® Controller is the successor to the highly successful ICS-6, directly replacing it. 

    • Full start-to-end dual channel architecture and fault detection
    • Interlocked mains supply 
    • Interlocked low voltage supply for beam shutters 
    • Laser Interlock® connector operators for all lasers
    • Time limited fail-safe override option 
    • Automatic switching of illuminated signs indicating danger or safe modes
    • Emergency stop circuit to prevent injury or damage in an emergency
    Read moreDone
  • ICS-DB-2-0 Interlock Interface

    ICS-DB-2/0

    Distribution Box

    The ICS-DB-2/0 distribution box has can accommodate two interlock output connections (laser connection). 

    Read moreDone

  • ICS-DB30-0/2

    Distribution Box

    The ICS-DB30-0/2 distribution box has can accommodate two Lasermet beam shutter connections. 

    Read moreDone
  • ICS-DB30-1-1 Laser Shutter Interlock 1

    ICS-DB30-1/1

    Distribution Box

    The ICS-DB30-1/1 distribution box can accommodate one Lasermet beam shutter and one interlock output (laser connection).  

    Read moreDone
  • ICS-DBS-IC Interlock2

    ICS-DBS-IC

    Switched Distribution Box

    Lasermet’s ICS-DBS-IC switched interlock distribution box allows you to easily arm and disarm your connected laser.  

    Read moreDone

  • ICS-LLDC Light Lock Door Controller

    ICS-LLDC is an Interlock System for Sequential Operation of Light lock Doors which incorporates a multitude of advanced features, including:

    • Proximity Sensors to detect the presence of individuals near the doors.
    • Security Alarms to notify any unauthorized attempts in the system.
    • DIN Rail Mounting.
    • LED Indicators provides real-time status of doors.
    Read moreDone

  • ICS-SOLO Low-cost Laser Interlock® Controller

    Ideal for Hand-held Laser Welding Enclosures

    The ICS-SOLO is a low-cost, dual-channel laser safety interlock controller ideal for handheld laser welding enclosures. It is a single input, single output laser safety controller typically used in small laser safety enclosures with a single door and controlling a single laser. The ICS-SOLO is a dual channel device which means that there are two input switches that must both be closed for the laser to be enabled.

    This is achieved using Lasermet’s dual channel door interlock switch. ICS-SOLO has a simple, easy-to-use control panel which can be wired directly to the dual channel switch on the interlocked door and to the laser, keyswitch, emergency stops, and LED Warning Sign.

    Read moreDone

  • ICS-TOUCH

    Interlock® Control System for Operating Theatres 

     

    The ICS-TOUCH provides touchscreen monitoring and control for operating theatres and X-ray machines. 

     

    • Easy-to-use touchscreen technology
    • Interlocked Doors, Roller Blinds and Emergency Stops
    • Flush-fit to wall or door
    • Full dual channel safety to ISO 13849-1 Performance Level ‘e’ (PL ‘e’) 
    • Secure Access Keypad Lock

     

    Read moreDone

  • Interlocked Housing Label

    £1.21 – £7.26

    Interlocked Housing Labels are required on all interlocked panels which when opened will give access to radiation in excess of Class 1 when the Interlock is overridden. The label should be fixed in close proximity to the opening and must be visible prior to and during Interlock override. The class of this label is determined by the class of the laser radiation accessed once the panel is opened and the Interlock overridden (e.g., an interlocked panel on a Class 1 laser product, which when opened and the Interlock overridden gives access to Class 4 laser radiation will require an Interlocked Housing Class 4 label).

    Select optionsDone

  • IS-MDC-12 Interlock® Switch

    Dual Channel Interlock® Switch

    Lasermet’s IS-MDC-12 is a dual channel coded magnetic door safety contact, which is used to detect when a door or other moveable cover forming part of a protective enclosure is open.

    • Achieve Performance Level ‘e’ as specified in BS EN 13849-1:2008
    • Small, sleek, and compact package
    • CE and UKCA marked
    Read moreDone