Transportation and the automotive industry have started using lasers in manufacturing processes such as laser welding, laser cutting, laser engraving, laser marking, and more. Lasermet supports these growing needs from laser welding helmets, laser blocking enclosures, to full turnkey interlock systems.
Compact Audio Alert System
The Audio Alert system is a local public address – PA system – for automatic announcements, warnings, information, or instructions suitable for indoor use.
Integrate into Interlock® control systems
The Audio Alert IP65 system by Lasermet is a local public address – PA system – for automatic announcements, warnings, information, or instructions suitable for outdoor use.
Custom messages can be up to 40 seconds long and the message repetition and frequency can be pre-programmed to your needs.
Lasermet’s Dolphin Laser Blocking Curtains are CE marked and certified to EN 12254 – Screens for Laser Working Places. These curtains are intended to be used to stop stray laser radiation from escaping a laser-controlled area or laser working area.
The Dolphin Laser Safety Curtain Pod by Lasermet is a curtain-based enclosure for hand-held laser welders. The Dolphin Pod is a low-cost solution to protect workers from the escape of hazardous laser radiation.
The Falcon Roll-up Active Speed Door is an industrial door which is ideal for manufacturing and laser processing applications as well as for indoor industrial and outdoor logistics that have frequent high-speed traffic.
The Glaser Jailer by Lasermet is a fail-safe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window. It is suitable for all laser powers, wavelengths, and waveforms. The Glaser Jailer system isolates the laser safety input within 50ms of an inadvertent laser window strike, rendering the laser safe.
I-Extract is Lasermet’s fume extraction system specifically designed for the extraction and filtration of gases and emissions created by lasers during laser welding, laser cutting, and laser cladding processes.
Designed as an integrated part of Lasermet’s Laser Castle laser safety cabin, the I-Extract has ample power to extract the appropriate volume of emitted gases produced in the cabin.
Lasermet’s established and proven ICS Interlock® control system is available as an OEM version which is specifically designed for integrators to use as part of the laser control system.
The ICS-9 Laser Interlock® Controller is the successor to the highly successful ICS-6, directly replacing it.
The ICS-DB-2/0 distribution box has can accommodate two interlock output connections (laser connection).
The ICS-DB30-0/2 distribution box has can accommodate two Lasermet beam shutter connections.
The ICS-DB30-1/1 distribution box can accommodate one Lasermet beam shutter and one interlock output (laser connection).
Lasermet’s ICS-DBS-IC switched interlock distribution box allows you to easily arm and disarm your connected laser.
The ICS-SOLO is a low-cost, dual-channel laser safety interlock controller ideal for handheld laser welding enclosures. It is a single input, single output laser safety controller typically used in small laser safety enclosures with a single door and controlling a single laser. The ICS-SOLO is a dual channel device which means that there are two input switches that must both be closed for the laser to be enabled.
This is achieved using Lasermet’s dual channel door interlock switch. ICS-SOLO has a simple, easy-to-use control panel which can be wired directly to the dual channel switch on the interlocked door and to the laser, keyswitch, emergency stops, and LED Warning Sign.
Safety Screens
To protect personnel from Class 4 and Class 3B lasers it is imperative to have comprehensive laser safety protection in place. Laser radiation must be prevented from escaping from labs and manufacturing facilities using certified equipment.
Lasermet’s Laser Castle® laser safety cabins protect personnel from the dangers of high powered laser beams by absorbing the laser power in the specially designed walls and roof. These modular, Class 1, room-sized enclosures are tested and certified to international laser safety standards and can be rapidly designed, built and installed by Lasermet.