-

Dual Channel Beam Dump for LS-20SIL and LS-30SIL
The dual channel BD-AC-DC beam dump is compatible with SIL-rated laser shutter LS-20SIL and LS-30SIL. When the shutter is closed, the shutter deflects the incoming laser beam towards its beam dump.
- Dual channel
- SIL3-rated
- Compatible with Lasermet beam shutters
-

Single Channel Beam Dump for LS-20 and LS-30 Shutters
The standard BD-AC beam dump is compatible with the single channel laser shutter LS-20 and LS-30. When the shutter is closed, the shutter deflects the incoming laser beam towards its beam dump port.
-

LS-200-BD-HP
Designed to be used with the LS-200 laser beam shutter, this beam dump can help absorb laser energy redirected from the shutter.
A shutter can dissipate about 20W of laser power, but with Lasermet LS-200-BD-HP it can dissipate considerably higher power laser energy.
-

BD-AC-16 and BD-AC-16TR
Lasermet’s air-cooled laser beam dump uses convection cooling to absorb laser beam energy when connected to a laser beam shutter. The air cooling system aids in absorbing beam energy and dissipates more laser power than a shutter itself.
A built-in temperature monitor is included in the upgraded models.
-

BD-HCX-45
Lasermet’s water-cooled beam dump uses a closed loop water supply system for absorbing high-power laser beam energy.
This beam dump is designed to be used in conjunction with a suitable laser beam shutter. When the shutter is closed, the incoming laser beam is deflected towards its beam dump port.
-

The “Thunder Shutter”
The LS-200 is Lasermet’s large aperture beam dump in the LS-20 Series. Capable of achieving PL’e’ safety rating to ISO EN ISO 13849-1 PL ‘e’ or IEC 61508-1 SIL 3.
- Gravity close blade
- Range of blade options
- Three control options
- Compatible with beam dumps
- Safety rated options:
- LS-200 (Standard) EN ISO 13849-1 PL ‘c’
- LS-200 SIL-24 EN ISO 13849-1 PL ‘e’ or IEC 61508-1 SIL 3
-

Available in standard version and dual-channel SIL3 version.
- Gravity close blade
- Range of blade options
- Compatible with beam dumps
- Safety rated SIL3 option
-

Laser Safety Beam Shutters & Beam Dumps
The LS- range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as the Lasermet’s Interlock® controller for use as a means of shutting down the laser beam automatically during unauthorised access, or manually when the beam is not required. They can also be used as stand-alone laser shutters for manual or remote switching of the laser beam.
- Gravity-operated for fail safe control
- Combined shutter and laser beam dump for added safety
- Compatible with interlocked safety control systems
- Safety latch prevents accidental laser beam switch on
- Remote switching option
-

The Lasermet LS-300 Series of Large Aperture Laser Safety Beam Shutters are intended to provide a means of preventing accidental exposure to potentially harmful laser beam. The laser shutters larger proportions can handle considerably higher laser powers.
Available aperture sizes included are:
-

The Lasermet LS-30 Series of Laser Safety Beam Shutters are intended to provide a means of preventing accidental exposure to potentially harmful laser beams. Compared to the previous LS-20 Series of beam shutters, the LS-30 Series can be mounted in any direction.
- Can be mounted in any orientation
- Spring-loaded blade
- SIL3 rated dual-channel versions available
- OEM versions available