Showing 1–16 of 45 results

  • 48V LED Ultra Signs

    Large Area LED Signs

    Lasermet’s range of Ultra Signs are attractive, professional, illuminated wall-mounted signs for use indoors. Unlike pixelated matrix LED displays, the backlit LED design creates a seamless high quality display and look.

    • High class, professional product for internal use
    • 48VDC Operating Voltage
    • LED lifespan up to 50,000 hours
    • Stackable using the interlocking plastic trim, or the specifically designed back mounting box for up to four signs
    • Low 24mm profile ideal for use at any height, virtually eliminates risk of obstruction or accident through collision
  • AA-04 Audio Alert

    Compact Audio Alert System

    The Audio Alert system is a local public address – PA system – for automatic announcements, warnings, information, or instructions suitable for indoor use.

    Integrate into Interlock® control systems

    • Fully custom messages, repetition, and volume
    • Line-out to external audio equipment
    • Safe at 24VDC low voltage
    • Professional, compact, wall-mounted design
  • AA-05 Audio Alert (IP65)

    IP65 rated Audio Alert for outdoor use

    The Audio Alert IP65 system is a local public address – PA system – for automatic announcements, warnings, information, or instructions suitable for outdoor use.

    Custom messages can be up to 40 seconds long and the message repetition and frequency can be pre-programmed to your needs.

    • Integrate into Interlock® control systems

    • Fully custom messages, repetition, and volume

    • Line-out to external audio equipment

  • Active Laser Castle

    Active Laser Safety Cabin

    Lasermet’s Active Enclosures is a laser safety cabin fitted with active guarding system – Laser Jailer. These modular, Class 1, room-sized enclosures are tested and certified to international laser safety standards and can be rapidly designed, built and installed by Lasermet.

    • Rapid-build modular laser safety cabin
    • Class 1 enclosure for Class 4 lasers
    • Active Guarding System has fail-safe laser detection technique
    • Suitable for all laser wavelengths
  • Active Lucas Table Top

    Optical Table Top Enclosure

    The Lucas Table Top is a fully enclosed enclosure for laser safety that fits onto rails located on an Optical Table.

    • Class 1 Enclosure for Class 4 Lasers
    • Certified to EN 60825-1 and ANSI Z136.1
    • CE and UKCA marked
  • Laser blocking curtain, Laser safety curtain, Laser curtain

    Dolphin Laser Blocking Curtains

    Certified Laser Blocking Curtains to EN 12254
    Lasermet’s Dolphin Laser Blocking Curtains are CE marked and certified to EN 12254 – Screens for Laser Working Places. These curtains are intended to be used to stop stray laser radiation from escaping a laser-controlled area or laser working area.
    • Made to measure
    • CE and UKCA marked
    • Ideal for industrial applications, such as handheld laser welding
    • Blackout laser blocking curtain
  • Dolphin Laser Safety Curtain Pod

    Safety for Hand-held Laser Welding
    • Ideal for hand-held laser welding
    • Interlock® ready 
    • Low-cost modular safety solution
    • Self-assembly
  • Insulated roll-up shutter door.

    Falcon Active Speed Door

    High speed Industrial Roll-up Shutter Door with optional Active Laser Guarding
    The Falcon Roll-up Active Speed Door is an industrial door which is ideal for manufacturing and laser processing applications as well as for indoor industrial and outdoor logistics that have frequent high-speed traffic.
    • Fast, highly efficient operation
    • Insulated and secure
    • Optional Active Guarding with Laser Jailer Laser Guarding system
  • Flatfoot Laser Blocking Screen

    The Flatfoot Laser Blocking Screens are designed as a semi-permanent passive guard to enclose an area where Class 3B or Class 4 lasers are in use.

    • Lightweight
    • Eliminates trip hazard
    • CE marked and certified to BS EN IEC 60825-4 Safety of Laser Products Part 4: Laser Guards
  • G-autodoor

    High-speed Industrial Guillotine Door for laser safety applications with optional Active Laser Guarding
    • Capable of withstanding direct hits from laser beams from Class 4 lasers
    • Made from Lasermet’s Laser Castle laser blocking material
    • Ideal for manufacturing environments
    • Indoor industrial applications that have frequent high-speed traffic
  • Glaser Castle Window

    Passive Laser Safety Window

    Glaser Castle Window enables a person to see inside a laser enclosure while being protected from laser radiation and provides protection with minimum inconvenience.

  • Active guard, Active guard window, laser safety window, laser viewing window

    Glaser Jailer

    Active Laser Safety Window

    The Glaser Jailer is a fail-safe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window. It is suitable for all laser powers, wavelengths, and waveforms. The Glaser Jailer system isolates the laser safety input within 50ms of an inadvertent laser window strike, rendering the laser safe.

    • Interlock® safety

    • Suitable for Class 1 Laser Enclosures

    • Certified to BS EN IEC 60825-4

  • Heavy Duty Laser Blocking Screen

    These heavy duty laser blocking screens are designed to enclose an area where Class 3B and Class 4 lasers are used to protect against accidental exposure.

    • Portable
    • Designed to block high power, multikilowatt laser
    • CE marked and certified to BS EN IEC 60825-4 Safety of Laser Products Part 4: Laser Guards
  • Extracts and filtrates gas emissions from laser welding and laser cutting.

    I-Extract

    Fume Extraction Systems for Laser Welding
    I-Extract is Lasermet’s fume extraction system specifically designed for the extraction and filtration of gases and emissions created by lasers during laser welding, laser cutting, and laser cladding processes.
    Designed as an integrated part of Lasermet’s Laser Castle laser safety cabin, the I-Extract has ample power to extract the appropriate volume of emitted gases produced in the cabin.
  • Interlock control system, Laser systems integrator, Interlock integrator

    ICS-7-OEM Interlock Controller

    An OEM version of ICS Interlock®
    Lasermet’s established and proven ICS Interlock® control system is available as an OEM version which is specifically designed for integrators to use as part of the laser control system.
    • Dual-channel safety
    • Ready to use with PLC controllers
    • Fail-safe reliability
    • Compatible with expansion modules
  • Laser interlock connector that controls laser interlocks, magnetic door locks, LED warning signs and laser shutter

    ICS-9 Interlock® Controller

    NRTL Certified Laser Interlock® Control System
    The ICS-9 Laser Interlock® Controller is the successor to the highly successful ICS-6, directly replacing it. 
    • Full start-to-end dual channel architecture and fault detection
    • Interlocked mains supply 
    • Interlocked low voltage supply for beam shutters 
    • Laser Interlock® connector operators for all lasers
    • Time limited fail-safe override option 
    • Automatic switching of illuminated signs indicating danger or safe modes
    • Emergency stop circuit to prevent injury or damage in an emergency