Glaser Castle Window
Passive Laser Safety Window
Glaser Castle Window enables a person to see inside a laser enclosure while being protected from laser radiation and provides protection with minimum inconvenience.
Showing 17–32 of 68 results
-
-
Glaser Jailer
Active Laser Safety Window
The Glaser Jailer is a fail-safe safety system that enables high powered lasers to be switched off virtually immediately if the laser beam inadvertently strikes the window. It is suitable for all laser powers, wavelengths, and waveforms. The Glaser Jailer system isolates the laser safety input within 50ms of an inadvertent laser window strike, rendering the laser safe.
-
Interlock® safety
-
Suitable for Class 1 Laser Enclosures
-
Certified to BS EN IEC 60825-4
-
-
Heavy Duty Laser Blocking Screen
These heavy duty laser blocking screens are designed to enclose an area where Class 3B and Class 4 lasers are used to protect against accidental exposure.
- Portable
- Designed to block high power, multikilowatt laser
- CE marked and certified to BS EN IEC 60825-4 Safety of Laser Products Part 4: Laser Guards
-
I-Extract
Fume Extraction Systems for Laser Welding
I-Extract is Lasermet’s fume extraction system specifically designed for the extraction and filtration of gases and emissions created by lasers during laser welding, laser cutting, and laser cladding processes.
Designed as an integrated part of Lasermet’s Laser Castle laser safety cabin, the I-Extract has ample power to extract the appropriate volume of emitted gases produced in the cabin.
-
ICS Buddy Portable Interlock System
The Interlock® Monitor and Control Tablet you can take anywhere
The ICS Buddy is Lasermet’s portable Interlock Monitor and Controller that can be used to remotely view and control the status of laser interlock controllers and laser shutters in a lab.
-
Provides portable control
-
Remotely view and control laser shutters
-
See the status of the whole lab remotely in Lab View
-
Ideal for multiple interlocks, shutters and LED warning signs
-
-
ICS-6 ELISe Interlock® Controller
The ICS-6 Laser Safety Interlock ® Controller features full start-to-end dual channel architecture and fault detection capabilities to meet all safety requirements for lasers. The ICS-6 can be integrated with the complete range of Lasermet’s Interlock equipment to create a full laser safety system.
- 3 expansion card sockets
- Interlocked mains supply and low voltage supply for beam shutters
- Laser Interlock® connector operators for all lasers
- Time limited fail-safe override option
-
ICS-7-OEM Interlock Controller
An OEM version of ICS Interlock®
Lasermet’s established and proven ICS Interlock® control system is available as an OEM version which is specifically designed for integrators to use as part of the laser control system.
- Dual-channel safety
- Ready to use with PLC controllers
- Fail-safe reliability
- Compatible with expansion modules
-
ICS-9 Interlock® Controller
NRTL Certified Laser Interlock® Control System
The ICS-9 Laser Interlock® Controller is the successor to the highly successful ICS-6, directly replacing it.
- Full start-to-end dual channel architecture and fault detection
- Interlocked mains supply
- Interlocked low voltage supply for beam shutters
- Laser Interlock® connector operators for all lasers
- Time limited fail-safe override option
- Automatic switching of illuminated signs indicating danger or safe modes
- Emergency stop circuit to prevent injury or damage in an emergency
-
ICS-DB-2/0
Distribution Box
The ICS-DB-2/0 distribution box can accommodate two interlock output connections (laser connection).
-
ICS-DB30-0/2
Distribution Box
The ICS-DB30-0/2 distribution box can accommodate two Lasermet beam shutter connections.
-
ICS-DB30-1/1
Distribution Box
The ICS-DB30-1/1 distribution box can accommodate one Lasermet beam shutter and one interlock output (laser connection).
-
ICS-DBS-IC
Switched Distribution Box
Lasermet’s ICS-DBS-IC switched interlock distribution box allows you to easily arm and disarm your connected laser.
-
ICS-LLDC
ICS-LLDC is an Interlock System for Sequential Operation of Airlock Doors which incorporates a multitude of advanced features, including:
- Proximity Sensors to detect the presence of individuals near the doors
- Security Alarms to notify any unauthorized attempts in the system
- DIN Rail Mounting
- LED Indicators provides real-time status of doors
-
ICS-RBX Wireless Roller Blind Controller
The ICS-RBX is an expansion card for the ICS-9 Interlock Controller designed to operate Lasermet’s Laser Blocking Roller Blinds wirelessly. This system incorporates a multitude of advanced features, including:
- Integration with ICS-9 Interlock Controller and ICS-BUDDY
- Fits into ICS-9 with standard expansion card layout.
- Built-in up/down switches, “stop” button, and “program” button.
- Supports automatic and remote operation modes.
-
-
ICS-TOUCH
Interlock® Control System for Operating Theatres
The ICS-TOUCH provides touchscreen monitoring and control for operating theatres and X-ray machines.
- Easy-to-use touchscreen technology
- Interlocked Doors, Roller Blinds and Emergency Stops
- Flush-fit to wall or door
- Full dual channel safety to ISO 13849-1 Performance Level ‘e’ (PL ‘e’)
- Secure Access Keypad Lock