Showing 33–48 of 68 results
-

Dual Channel Interlock® Switch
Lasermet’s IS-MDC-12 is a dual channel coded magnetic door safety contact, which is used to detect when a door or other moveable cover forming part of a protective enclosure is open.
-
Achieve Performance Level ‘e’ as specified in BS EN 13849-1:2008
-
Small, sleek, and compact package
-
CE and UKCA marked
-

Protection from Stray Laser Radiation
Lasermet’s laser blocking roller blinds are designed as a passive guarding system to block laser light from escaping the theatre, laboratory or laser facility where Class 3B or Class 4 lasers are in use, either to protect against accidental exposure to the laser beam or for long term blocking of laser radiation at lower power densities.
-

Passive Laser Safety Cabin
Lasermet’s Laser Castle® laser safety cabins protect personnel from the dangers of high powered laser beams by absorbing the laser power in the specially designed walls and roof. These modular, Class 1, room-sized enclosures are tested and certified to international laser safety standards and can be rapidly designed, built and installed by Lasermet.
-
Rapid-build modular laser safety cabins
-
Passive Class 1 Enclosures for Class 4 lasers
-
CE Certified to EN IEC 60825-4 Safety of Laser Products Part 4 – Laser Guards
-

Self-build Laser Safety Enclosure
-
Ideal for hand-held lasers and small laser robots
-
Interlock® ready
-
Low-cost modular safety solution
-
Self-assembly
-

Active Laser Guarding Safety System
The Laser Jailer combines an inherently fail-safe laser detection technique and Lasermet’s proven laser Interlock® control system technology to create an active laser guarding system conforming to Machinery Directive Standard EN 13849-1.
-
Active and Passive Laser Enclosures
-
Lightweight, modular, scalable
-
Retrofit to existing rooms and enclosures
-
Rapid turnkey solution
-
Conforms to laser safety standards EN/IEC 60825-1 and ANSI Z136.1
-

All labels are printed on durable self-adhesive vinyl, with the correct coloring, wording, symbols and layout as defined in the European, International or US standards.
-

The LaserLightScreen are designed to enclose an area where Class 3B and Class 4 lasers are used to protect against accidental exposure or for long term blocking of laser radiation at lower power densities.
- Conforms to EN 60825-4: Safety of Laser Products Part 4 – Laser Guards
- Flat-footed option to eliminate tripping hazards
- Portable screen using castor wheels
-

Small LED Warning Signs
These compact backlit LED signs are ideal for use in commercial, retail, or industrial premises. Custom messages are available to suit a variety of needs, also available in single message or dual message options.
-
Environmentally friendly, low power consumption, using only 3.6W each
-
Available in either one-way or two-way options
-
Expected lifetime of 50,000 hours, requiring no maintenance during their operational life
-
Automatic or manual switching options
-

Large Area LED Signs
Lasermet’s range of Ultra Signs are attractive, professional, illuminated wall-mounted signs for use indoors. Unlike pixelated matrix LED displays, the backlit LED design creates a seamless high quality display and look.
-
High class, professional product for internal use
-
Low energy, low voltage 24VDC (48VDC option available)
-
LED lifespan up to 50,000 hours
-
Stackable using the interlocking plastic trim, or the specifically designed back mounting box for up to four signs
-
Low 24mm (0.94 inch) profile ideal for use at any height, virtually eliminates risk of obstruction or accident through collision
-

-

-

-

LS-200-BD-HP
Lasermet’s beam dump is designed for the LS-200 laser beam shutter. A shutter can dissipate about 20W of laser power, but with Lasermet LS-200-BD-HP it can dissipate considerably higher power laser energy.
-

The Lasermet LS-30 Series of Laser Safety Beam Shutters are intended to provide a means of preventing accidental exposure to potentially harmful laser beams.
- Mounted in any orientation
- Spring-loaded blade
- SIL3-rated Dual-channel versions available
- OEM versions available
-

The Lasermet LS-300 Series of Laser Safety Beam Shutters are intended to provide a means of preventing accidental exposure to potentially harmful laser beam.
Available aperture sizes included are:
- 2″ (50mm)
- 3″ (75mm)
- 4″ (100mm)
-

Remote Switching for Beam Shutters
The LS-RS30 allows Lasermet beam shutters to be remotely operated and controlled. It can accommodate a single beam shutter connection.