Glaser Jailer

Description

Usually fitted into the panels or doors of the Laser Castle Laser Safety Cabin, the Glaser Jailer Active Laser Safety Window is connected to the Interlock^® Control System to enable laser operations to be viewed safely from outside the cabin.

This enables high-power multi-kilowatt lasers (up to 10kW) used for welding, cutting and cladding to be viewed from a safe vantage point— preventing harm to personnel and preventing damage to surrounding infrastructure. The Glaser Jailer window is suitable for all laser powers, wavelengths and waveforms.

Active Guarding Window Technology

Integrated with the Lasermet Laser Jailer^® Active Guarding System, it provides a complete active window solution. Currently in operation worldwide, this revolutionary active patented technology is already tested and proven.

Glaser Jailer windows are constantly monitored by the Interlock^® control system when the laser is in operation. A direct hit by a powerful laser will cause the window to activate the Interlock^® controller which then turns the laser off. This failsafe technology isolates the laser safety input in less than 50ms.

The Glaser Jailer window should be replaced following a direct hit, following an investigation into the cause of the direct hit and when corrective measures have been taken to prevent it from happening again.

Certified Laser Safety

Glaser Jailer Active Windows can be incorporated into, and form part of, a certified Class 1 Laser Enclosure (for multi-kW Class 4 lasers) conforming to BS EN IEC 60825-4: Safety of laser products – Part 4: Laser guards.

Specifications

LASER FILTER RATINGS

Wavelength (nm)	EN 12254: 2010 + AC: 2011
180 – 315	D AB8 + IR AB3
>315 – 380	D AB5 + IR AB6 + M AB6Y
915 -1180	D AB5 + IR AB7
2720 – 2940	D AB2
5000 – 11000	D AB2 + I AB3

STANDARD SIZES

Custom sizes are also available to meet customer requirements.

A4 Size	10.87″ x 14.49″ (8.27″ x 11.69″ viewing area)
Full Size	32.68″ x 24.8″ (30.32″ x 22.44″ viewing area)

---