Lasermet and NPL have produced this joint venture product, Optoblok, the latest safety equipment for use in optical laboratories.
Optoblok, the Optical Table Laser Guarding System is designed specifically to reduce the risk of stray laser beams being inadvertently directed at personnel in the laser optics laboratory. This new modular system fits neatly on to optical tables to provide a 300mm high wall.
The system comprises of certified laser blocking walled panels, posts (to screw into the table) and channel posts which are either straight or right angled to connect the wall panels together.
The modular system is easily constructed by screwing the posts into the table, then slotting the straight or corner channel posts over the round posts and then simply placing the wall panels in position. Once the panels are inserted they can be secured by a retaining screw and washer on top of the post if required.
Panel sections are available in optical table unit lengths of 2,3,4,5,8,12 and 16 thereby minimising and optimising the quantity required.
The system is compatible with both metric and imperial optical tables using metric or imperial screw threads and spacing, making this truly a worldwide compatible product covering both the US and European markets in one.
The 300mm high wall around the perimeter of the table maximises the opportunity for safe working while at the same time allowing virtually unlimited access to the table and its components. The opportunity for an engineers' hand or arm to accidentally interfere with the laser beam is reduced as it now takes a deliberate act to access the table.
One of the key benefits of Optoblok is that it provides a safe, adaptable, simple laser blocking walled system that enables cable entries to be made and then changed easily for the next set-up. It can easily handle, for example, large diameter control cables. These are easily provided for within the Optoblok system as there are three advised options to select from as recommended by the Optoblok designer aid software, which is freely available to potential customers to design and specify Optoblok to their requirements. The three labyrinth options are for small, medium and large cable entry ways to be made using the minimum number of components.
A labyrinth system is proposed in the designer programme to provide the optimum (usually the minimum) number of components to enable the cabling to enter the table, thus maximising the curvature radius of the cables while minimising the entry gap to eliminate any line-of-sight route that could be used by a laser beam. This ensures there is no line of sight laser beam exit point up to a height of 300mm.
Lasermet's Optical Table Guarding Designer programme is a parts list compiler that enables customers to specify the Optoblok system they require without compromising safety. Simple to use, this program lists all the components for the containment including the facility to specify the number and size of access cable gateways whilst preventing line of sight corridors and therefore preventing the escape of laser light.
All you need to do is decide on the overall dimensions of the four sided Optoblok laser guarding system you require and then decide on the number and size of cable entry points you need for each wall. The programme will then display a list of the straight and right angled posts and the wall panels you need with their respective sizes.
|Irradiated Area||PEL (T3) 10 s||PEL (T2) 100 s|
|4 mm²||30 MW/m²||17 MW/m²|
|2000 mm²||1.4 MW/m²||0.8 MW/m²|
The system carries the CE marking.
|16 space panels||00764-03-016|
|12 space panels||00764-03-012|
|8 space panels||00764-03-008|
|5 space panels||00764-03-005|
|4 space panels||00764-03-004|
|3 space panels||00764-03-003|
|2 space panels||00764-03-002|
|Straight Channel Posts||00754-03-306|
|Corner Channel Posts||00755-03-306|
|Round Support Posts, M6||00756-03-305|
|Round Support Posts, UNC||00842-03-305|