Home >

Mounting options for Ultra LED signs

Mounting options for Ultra LED signs

Brackets and Bezels

Download PDF Version

The following mounting options are available for the 470 and 790mm wide Ultra range of LED signs. The drawing below show the sign mounting arrangement, a cross sectional view and a bracket system that fits onto the back of the signs. The conduit shown in the ceiling mount brackets is an industry standard electrical conduit.

Ceiling mount bracket - Single Sign

Part no. LEDS-ULT-CMB

Ceiling mount bracket - Double Sign

Part no. LEDS-ULT-CMB2

Wall mount bracket - Single Sign

Part no. LEDS-ULT-WMB

Wall mount bracket - Double Sign

Part no. LEDS-ULT-WMB2

Flush Mount Bezel

The flush mount bezel is available
for mounting single or multiple stacked Ultra signs
flush to a wall.

(One sign is shown in this example)

LEDS-ULT-470-FMB1 for 1 sign
LEDS-ULT-470-FMB2 for 2 signs
LEDS-ULT-470-FMB3 for 3 signs
LEDS-ULT-470-FMB4 for 4 signs

Backboxes

Download PDF Version

Backboxes are recommended when two or more Ultra LED signs are to be mounted together to create a multiway sign.
They alse enable top entry for cable conduit (back or side conduit entry is available without the backbox).

Plastic trims are required to fit between each sign (i.e. one for two signs, two for three signs, etc).

Backbox for 2 off 470mm LED Ultra Signs

4 off 470mm LED Ultra Signs stacked

Backbox for 2 off 470mm LED Ultra Signs

LEDS-ULT-470-BB2

 Backboxes for the 470mm wide and 790mm wide Ultra LED signs are identical. Part numbers are shown below:

LED-ULT-470-BB2
Backbox for two 470mm or two 790mm wide signs

LED-ULT-470-BB3
Backbox for three 470mm or three 790mm wide signs

LED-ULT-470-BB4
Backbox for four 470mm or four 790mm wide signs

LED-ULT-470-PT
Plastic Trim for multiple 470mm or four 790mm wide signs