Lasermet Ltd

UK Flag
Call: 01202 770740
Email:
 

Lasermet Inc.

US Flag
Call: 847 466 1077
Email:
Click for Lasermet Inc.
Home >

Large Area Low Voltage LED Signs - Ultra Range

Large Area Low Voltage LED Signs - Ultra Range

The result of an intensive development programme, the Lasermet Ultra Range of LED signs offer state of the art LED technology in a highly aesthetic design.

Ultra Slim Design

With a thickness of only 24 mm these signs are the ultimate in slimline design and can be wall mounted at any height without causing any form of obstruction or hazard. The signs are constructed of an aluminium extrusion with textured matt black powder coat finish, moulded black plastic end caps and tinted acrylic front panel, giving a highly desirable appearance.

large area LED signs, station and lab

Low Voltage Secret Sign

The front panel tint is balanced for maximum contrast and the sign is secret when not lit. Operation is from 24 VDC which is inherently safer than mains wiring as well as being easier and cheaper to install.

Custom Legends and Colours to Suit Application

A range of standard signs have been developed. Click here to see the standard texts which are available. Lasermet can create custom legends and graphics to customer specification. These can be in the standard white or any colour as desired. Dual message signs which display different messages in red and green within the same area of the sign (see our mini LED sign technology for examples of this), can also be created.

Variable Brightness - Option

The Ultra range of LED signs have an option to incorporate an automatic variable brightness control. This enables the signs to be to vary their output to match the background illumination. This avoids signs becoming 'flooded out' by sunlight or other illumination, or being overly bright in darker conditions. It also means the signs will save power in low light conditions. Alternatively the signs can be fixed at full brightness or the brightness can be controlled externally by applying a control voltage (0 - 24 VDC).

large area LED signs, airport and access allowed

Dual Redundancy

The signs normally ship with dual LED illuminator boards, which provides redundancy in the case of LED failure. If true redundancy is required a second control board should be requested (part no: LEDS-ULT-CB). This fits inside the sign and provides true dual redundancy in the event of LED or control board failure. The sign can then be run from a single supply or dual supplies for highly safety critical applications.

High Quality Backlit LED Signs

By using the backlighting technique a high quality display is achieved, avoiding the pixilation effect of matrix LED signs. Complex symbols and shapes can also be displayed as shown in many of these pictures.

Maintenance Free

Large four way LED SignThe LEDS have a 50,000 hour operational lifetime making these signs effectively maintenance free, eliminating both maintenance costs and risks.

Sizes

Lasermet Ultra signs are available in either Standard or Large Size. Standard size is 470 mm long, while large size is 790 mm long. Both options are 178 mm high and just 24 mm thick.

Single or Multi Aspect Signs

The signs are single aspect. However, a number of signs can be connected together to create multiple aspect signs. This can be done either by mounting them directly to the wall, one above the other, and using the connecting plastic trim, or by hanging them onto the purpose made backbox. Backboxes are available for single, double, triple or quadruple aspect signs.

Ultra Range of LED Signs Specifications

Standard Size:LEDS-ULT-470 Large Size:LEDS-ULT-790
Overall Dimensions (mm) 470 x 178 x 24 790 x 178 x 24
Area available for legend (mm) 340 x 90 660 x 90
Weight (kg) 2 kg 3 kg
Operating Voltage 24 VDC
Brightness Control Voltage (optional) 0 - 24 VDC
Maximum current 0.65 A 1.3 A
Min operational current 0.15 A 0.3 A
Cable Entry Rear or side (via 20 mm dia knockouts) Top or bottom entry is available when using the optional backbox
Optional Backbox size (mm) Single: 362 x 162 x 35 Single: 682 x 162 x 35
Double: 362 x 343 x 35 Double: 682 x 343 x 35
Triple: 362 x 524 x 35 Triple: 682 x 524 x 35
Quadruple: 362 x 705 x 35 Quadruple: 682 x 705 x 35


Laser Radiation LED Warning Signs (470mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-470-L (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-470-L-2W
Specification See top of page

Laser Radiation LED Warning Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-790-L (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-790-L-2W
Specification See top of page


Xray LED Warning Signs (470mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-470-XR (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-470-XR-2W
Specification See top of page

Xray LED Warning Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-790-XR (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-790-XR-2W
Specification See top of page


Access Prohibited LED Signs (470mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-470-AP (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-470-AP-2W
Specification See top of page

Access Prohibited LED Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-790-AP (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-790-AP-2W
Specification See top of page


Do Not Enter LED Signs (470mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-470-DNE (white)
add -R/-Y/-G for red, yellow or green)
LEDS-ULT-470-DNE-2W
Specification See top of page

Do Not Enter LED Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - Safe N/A
On - Hazard
Part No. LEDS-ULT-790-DNE (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-790-DNE-2W
Specification See top of page


We Are Open / We Are Closed LED Signs (470mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - State A
On - State B
Part No. Open:LEDS-ULT-470-OP (white)
(add -R/-Y/-G for red, yellow or green)
Closed:LEDS-ULT-470-CD (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-470-CD-2W
Specification See top of page

We Are Open / We Are Closed LED Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
3 State Sign
(both red and green messages display on one sign)
Off
On - State A
On - State B
Part No. Open: LEDS-ULT-790-OP (white)
(add -R/-Y/-G for red, yellow or green)
Closed:LEDS-ULT-790-CD (white)
(add -R/-Y/-G for red, yellow or green)
LEDS-ULT-790-CD-2W
Specification See top of page


Boarding LED Signs (790mm)

2 State Sign
(available in white, red, yellow or green)
Off
On
Part No. LEDS-ULT-790-BDG (white)
(add -R/-Y/-G for red, yellow or green)
Specification See top of page

For more information on Lasermet's range of illuminated signs, please visit our illuminated signs site.