Lasermet Ltd

UK Flag
Call: 01202 770740
Email:

Lasermet Inc.

US Flag
Call: 847 466 1475
Email:
Home >

Slim Jim thin profile LED sign

Slim Jim D

The DALI Compatible Thin Profile Backlit LED Sign

DALI LED sign, no transformer

Slim Jim D is the thin-profile, backlit LED sign compatible with DALI equipment. Measuring approximately 11mm thick, this extremely thin LED sign runs directly from 230V AC mains power with no additional power supply or transformer. It is compatible with the DALI technical standard IEC 62386 (Digital Addressable Lighting Interface) enabling the sign to be controlled centrally. The sign fits neatly onto the UK, US and European mains power, single and double socket back-boxes as well as the standard conduit boxes making it easy and quick to fit for contractors. The DALI compatible interface unit fits into the 35mm deep back box.

Benefits of Slim Jim

  • High Quality - smart appearance
  • DALI compatible - (Digital Addressable Lighting Interface)
  • Only 11mm thick
  • 230V AC or 110V AC
  • No transformer
  • Fits to existing mains power, single or twin socket back-boxes (35mm deep for DALI I/F)
  • Fits to conduit boxes
  • Cheaper and faster installation
  • Current 40 mA (230 VAC), 80mA (110 VAC)
  • Contractor friendly

Dimensions

Overall dimensions 355 x 105 x 11mm
Sign dimensions 275 x 58mm

DALI LED room in use slim jim sign

Minimum depth 35mm to accommodate DALI compatible interface unit

DALI conduit fitting locations

Conduit box fixing locations

back-box fittings

Rear of sign fixes to any of these UK and European mains power back-boxes

230 VAC Signs

Message

Part No for Red LEDs Part No for Yellow LEDs
In Use LEDS-SJD-R-IU LEDS-SJD-Y-IU
Room In Use LEDS-SJD-R-RIU LEDS-SJD-Y-RIU
Lab In Use LEDS-SJD-R-LIU LEDS-SJD-Y-LIU
Occupied LEDS-SJD-R-OC LEDS-SJD-Y-OC
Laser On LEDS-SJD-R-LR LEDS-SJD-Y-LR
X-Rays On LEDS-SJD-R-XR LEDS-SJD-Y-XR
Biohazard LEDS-SJD-R-BH LEDS-SJD-Y-BH
No Entry LEDS-SJD-R-NE LEDS-SJD-Y-NE
Do Not Enter LEDS-SJD-R-DNE LEDS-SJD-Y-DNE

Custom wording for signs

If you require a DALI compatible Slim Jim D sign with your own wording, please order using the relevant part number below followed by the wording required. (There is a one - off tooling charge for custom wording).

Part numbers for DALI compatible Slim Jim signs without overlays are as below:

Type

Part No
230 VAC Red LEDS-SJD-R
230 VAC Yellow LEDS-SJD-Y
110 VAC Red LEDS-SJD-110-R
110 VAC Yellow LEDS-SJD-110-Y

For more information on Lasermet's range of illuminated signs, please visit our illuminated signs site.